(Adding categories) |
|||
Line 10: | Line 10: | ||
* Silkscreen labels for SMD parts are too small. ''Recommendation: use larger labels'' |
* Silkscreen labels for SMD parts are too small. ''Recommendation: use larger labels'' |
||
* Power wires don't fit well in C3 cases. ''Recommendation: add notches to PCB for wires'' |
* Power wires don't fit well in C3 cases. ''Recommendation: add notches to PCB for wires'' |
||
+ | [[Category:Battery]] |
||
+ | [[Category:PCB36]] |
||
+ | [[Category:USB]] |
||
+ | [[Category:Solar]] |
Revision as of 06:41, 24 January 2012
Assembly
PCB36-SBU1 v2
- TESTED: Solar panel input
- TESTED: USB mini B input
- TESTED: USB A output
- TESTED: LiPo input/output
- Schottky diode pads are too small for SOD-123LF package, but you can add solder to bridge the gaps. Recommendation: make pads larger
- SOT23-5 pads are a bit too small for syringe paste application. Recommendation: make pads larger
- USB D-/D+ signals are not passed through. Recommendation: pass D-/D+ signals through from USB mini B to USB A jacks and add resistors to match iPhone charging requirements
- Silkscreen labels for SMD parts are too small. Recommendation: use larger labels
- Power wires don't fit well in C3 cases. Recommendation: add notches to PCB for wires